A little clarity for your next decision
Math calculators
Work through percentages, algebra, geometry, sequences, and number calculations.
438 calculators available
- Acute-Branch Rhombus Area, Diagonals and Height
Calculate acute-branch rhombus area, diagonals and height with retained unit controls, positive geometric roots and explicit inverse-branch assumptions.
- Decagon Area from Side, Perimeter or Radius
Find the area of a regular ten-sided shape from a known linear measurement, retaining its perimeter and circle radii.
- Dodecagon Area, Side Length & Circle Radii
Calculate area and related dimensions for a regular twelve-sided outline with an illustrated radius and apothem guide.
- Ellipse Area from Two Semi-Axes
Calculate ellipse area from two semi-axes with converted units, positive geometric inverses and explicit model limits.
- Golden Rectangle Width, Extension and Full Area
The full rectangle has width a and length a+b. Segment b is the extension beyond an a-by-a square. The area is a(a+b), equal to a²φ, rather than the area ab of the smaller remainder.
- Golden Section Lengths and Whole Segment
Yes. The longer-to-shorter ratio equals the whole-to-longer ratio, both φ. The whole is also the sum of the two positive sections. Any one length determines the others.
- Heptagon Area from Linear Measurements
Work between a regular heptagon’s area, side, perimeter, outer radius and apothem using its fixed seven-sided geometry.
- Rectangle Diagonal, Opposite-Long-Side Angle and Boundary
It is the right or obtuse angle opposite the longer side, 2asin(l/d). The other diagonal angle is supplementary. A square gives 90 degrees for both.
- Rectangle Dimensions to Square Feet
Calculate a rectangular area in square feet from dimensions in feet, inches or metric units.
- Rectangle Linear & Area Scale Comparison
Compare original and scaled rectangle dimensions, including the squared relationship between length scale and area scale.
- Rectangle Perimeter & Missing Side
Find a rectangle’s missing side from its perimeter and the other side, with independent length-unit selectors.
- Rectangle Perimeter, Area and Ordered Diagonal Measurements
A feasible pair determines two side lengths up to exchange. This workflow chooses the larger as length and the smaller as width. Area cannot exceed half the squared diagonal; equality describes a square.
- Rectangle Width from Linked Length, Area or Boundary
Direct length/width entries can use either orientation. When only area and perimeter are supplied, the captured quadratic inverse chooses the larger side as length and the smaller side as width.
- Rectangular Face Area & Unit Conversion
Calculate the area of one rectangular face, or a missing side, with metric and customary area units.
- Regular Decagon Dimensions & Four Diagonal Lengths
Compute ten-sided regular-polygon measurements, including the four distinct vertex-to-vertex diagonal lengths.
- Regular Dodecagon Dimensions & Five Diagonal Lengths
Relate a regular twelve-sided shape’s side, perimeter, area, radii and five distinct diagonal spans.
- Regular Heptagon Side, Area, Radii & Angles
Connect side length, perimeter and circle radii for a seven-sided regular shape, with its interior and central angles.
- Regular Hexagon Area, Diagonals and Circle Radii
Regular Hexagon Area, Diagonals and Circle Radii. Use unit controls and documented positive geometric roots to compare base, lateral and total measures.
- Regular Octagon Area and Three Diagonal Lengths
Regular Octagon Area and Three Diagonal Lengths. Use unit controls and documented positive geometric roots to compare base, lateral and total measures.
- Regular Pentagon Area, Diagonal, Height and Apothem
Regular Pentagon Area, Diagonal, Height and Apothem. Use unit controls and documented positive geometric roots to compare base, lateral and total measures.
- Regular Polygon Area from Side, Circumradius or Apothem
Regular Polygon Area from Side, Circumradius or Apothem. Use unit controls and documented positive geometric roots to compare base, lateral and total measures.
- Regular Polygon Boundary Length and Equal Side
This workflow assumes equal sides. For an irregular polygon, add the actual side lengths instead of multiplying one side by n.
- Regular Polygon Interior and Turning Angles
It is the nonreflex turning angle 360°/n, supplementary to the interior angle. It is not the reflex angle outside the polygon.
- Regular Polygon Side Count, Area & Radii
Choose any whole side count of at least three and solve regular-polygon measurements from a side, perimeter, area or radius.
- Right Trapezoid Area, Slant and Base Inverse Branch
Calculate right trapezoid area, slant and base inverse branch with retained unit controls, positive geometric roots and explicit inverse-branch assumptions.
- Rolling Coin Spins During One Outside Circuit
The moving center travels a circle with radius equal to the sum of the two coin radii. Dividing that path length by the moving coin circumference gives two self-axis spins for equal coins. This assumes outside rolling without slipping.
- Spiral Length Estimate & One-Turn Helix
Estimate a tightly wound planar spiral length, or calculate the length of one uniform helical turn around a cylinder.
- Trapezoid Midsegment from Parallel Bases
Calculate trapezoid midsegment from parallel bases with retained unit controls, positive geometric roots and explicit inverse-branch assumptions.
- Circular Frustum Volume with Perpendicular and Slant Height
Circular Frustum Volume with Perpendicular and Slant Height. Convert compatible units, recover unknown dimensions and distinguish curved surfaces, bases and total measures.
- Closed Cone Surface from Radius, Circumference and Slant
Closed Cone Surface from Radius, Circumference and Slant. Convert compatible units, recover unknown dimensions and distinguish curved surfaces, bases and total measures.
- Closed Cylinder Surface, Volume and Axial Diagonal
Closed Cylinder Surface, Volume and Axial Diagonal. Convert compatible units, recover unknown dimensions and distinguish curved surfaces, bases and total measures.
- Cone and Circular Frustum Volume in Separate Sections
Cone and Circular Frustum Volume in Separate Sections. Convert compatible units, recover unknown dimensions and distinguish curved surfaces, bases and total measures.
- Cone Curved Surface Area and Closed Total
Cone Curved Surface Area and Closed Total. Convert compatible units, recover unknown dimensions and distinguish curved surfaces, bases and total measures.
- Cone Diameter with Height, Slant and Surface Controls
Cone Diameter with Height, Slant and Surface Controls. Convert compatible units, recover unknown dimensions and distinguish curved surfaces, bases and total measures.
- Cone Radius from Volume, Height or Circular Base
Cone Radius from Volume, Height or Circular Base. Convert compatible units, recover unknown dimensions and distinguish curved surfaces, bases and total measures.
- Conical Frustum Closed Surface and Slant Length
Conical Frustum Closed Surface and Slant Length. Use unit controls and documented positive geometric roots to compare base, lateral and total measures.
- Cube Capacity with Surface and Diagonal Inverses
Cube Capacity with Surface and Diagonal Inverses. Use unit controls and documented positive geometric roots to compare base, lateral and total measures.
- Cube Edge, Face Diagonal, Space Diagonal and Size
Calculate cube edge, face diagonal, space diagonal and size with converted units, positive geometric inverses and explicit model limits.
- Cube Size from Edge, Volume, Surface or Diagonal
Cube Size from Edge, Volume, Surface or Diagonal. Use unit controls and documented positive geometric roots to compare base, lateral and total measures.
- Cube Surface, Volume and Face or Space Diagonal
No. A face diagonal is a√2, while the space diagonal is a√3. Each has its own control and label.
- Cuboid Capacity, Six-Face Area and Interior Diagonal
Cuboid Capacity, Six-Face Area and Interior Diagonal. Use unit controls and documented positive geometric roots to compare base, lateral and total measures.
- Cylinder Capacity in Cubic Feet
Calculate cylinder capacity in cubic feet with converted units, positive geometric inverses and explicit model limits.
- Cylinder Capacity in Cubic Inches
Calculate cylinder capacity in cubic inches with converted units, positive geometric inverses and explicit model limits.
- Cylinder Capacity in Cubic Yards
Calculate cylinder capacity in cubic yards with converted units, positive geometric inverses and explicit model limits.
- Cylinder Capacity in Liters and Cubic Units
Calculate cylinder capacity in liters and cubic units with converted units, positive geometric inverses and explicit model limits.
- Cylinder Capacity with US and Imperial Gallon Controls
Calculate cylinder capacity with us and imperial gallon controls with converted units, positive geometric inverses and explicit model limits.
- Cylinder Curved Side Surface Area
Calculate a cylinder’s lateral area from height and radius or diameter, excluding the two circular ends.
- Cylinder End Areas, Curved Side and Closed Surface
Cylinder End Areas, Curved Side and Closed Surface. Convert compatible units, recover unknown dimensions and distinguish curved surfaces, bases and total measures.
- Cylinder Height from Volume, Curved Area or Axial Diagonal
Cylinder Height from Volume, Curved Area or Axial Diagonal. Convert compatible units, recover unknown dimensions and distinguish curved surfaces, bases and total measures.
- Cylinder Radius from Capacity, Area and Height
Cylinder Radius from Capacity, Area and Height. Convert compatible units, recover unknown dimensions and distinguish curved surfaces, bases and total measures.
- Cylinder Volume, Radius, Diameter & Height
Relate a circular cylinder’s volume, height, radius and diameter using independent measurement units.
- Ellipsoid Volume from Three Semi-Axes
Calculate ellipsoid volume from three semi-axes with converted units, positive geometric inverses and explicit model limits.
- Hemisphere Curved Area, Flat Base and Total Surface
Hemisphere Curved Area, Flat Base and Total Surface. Convert compatible units, recover unknown dimensions and distinguish curved surfaces, bases and total measures.
- Hemisphere Volume from Radius, Diameter or Surface
Hemisphere Volume from Radius, Diameter or Surface. Convert compatible units, recover unknown dimensions and distinguish curved surfaces, bases and total measures.
- Hexagonal Pyramid Base, Lateral and Total Surface
Hexagonal Pyramid Base, Lateral and Total Surface. Use unit controls and documented positive geometric roots to compare base, lateral and total measures.
- Hexagonal Pyramid Capacity from Base Edge or Apothem
Hexagonal Pyramid Capacity from Base Edge or Apothem. Use unit controls and documented positive geometric roots to compare base, lateral and total measures.
- Hollow Cylinder Material Volume and Wall Thickness
Hollow Cylinder Material Volume and Wall Thickness. Convert compatible units, recover unknown dimensions and distinguish curved surfaces, bases and total measures.
- Polyhedron Vertices, Edges & Faces Relation
Solve the Euler V − E + F = 2 relation for a missing count in an applicable closed polyhedron.
- Rectangular Box Surface Area and Diagonal
Calculate rectangular box surface area and diagonal with converted units, positive geometric inverses and explicit model limits.
- Rectangular Box Volume and Space Diagonal
Calculate rectangular box volume and space diagonal with converted units, positive geometric inverses and explicit model limits.
- Rectangular Prism Base, Lateral and Six-Face Areas
Rectangular Prism Base, Lateral and Six-Face Areas. Convert compatible units, recover unknown dimensions and distinguish curved surfaces, bases and total measures.
- Rectangular Prism Faces, Volume and Space Diagonal
Rectangular Prism Faces, Volume and Space Diagonal. Convert compatible units, recover unknown dimensions and distinguish curved surfaces, bases and total measures.
- Rectangular Prism Volume from Three Perpendicular Edges
Rectangular Prism Volume from Three Perpendicular Edges. Convert compatible units, recover unknown dimensions and distinguish curved surfaces, bases and total measures.
- Regular Hexagonal Pyramid Face Areas and Capacity
Regular Hexagonal Pyramid Face Areas and Capacity. Use unit controls and documented positive geometric roots to compare base, lateral and total measures.
- Regular Tetrahedron: Volume, Area & Sphere Radii
Relate an equal-edge tetrahedron’s edge, height, volume, surface area and inscribed sphere measurements.
- Right Circular Cone Dimensions, Surface and Capacity
Right Circular Cone Dimensions, Surface and Capacity. Convert compatible units, recover unknown dimensions and distinguish curved surfaces, bases and total measures.
- Right Cone Height from Radius, Slant or Volume
Calculate right cone height from radius, slant or volume with converted units, positive geometric inverses and explicit model limits.
- Right Cone Slant Length, Base Angle and Half-Apex Angle
Calculate right cone slant length, base angle and half-apex angle with converted units, positive geometric inverses and explicit model limits.
- Right Rectangular Pyramid Capacity and Two Face Slants
Right Rectangular Pyramid Capacity and Two Face Slants. Use unit controls and documented positive geometric roots to compare base, lateral and total measures.
- Right Square Pyramid Heights, Faces and Volume
Right Square Pyramid Heights, Faces and Volume. Use unit controls and documented positive geometric roots to compare base, lateral and total measures.
- Ring and Horn Torus Surface from Inner and Outer Radii
Ring and Horn Torus Surface from Inner and Outer Radii. Convert compatible units, recover unknown dimensions and distinguish curved surfaces, bases and total measures.
- Sphere and Spherical Cap Volumes in Separate Sections
Sphere and Spherical Cap Volumes in Separate Sections. Use unit controls and documented positive geometric roots to compare base, lateral and total measures.
- Sphere Radius from Diameter, Surface, Volume or Circumference
Sphere Radius from Diameter, Surface, Volume or Circumference. Use unit controls and documented positive geometric roots to compare base, lateral and total measures.
- Sphere Radius, Surface, Volume and Inverse-Length Ratio
Calculate sphere radius, surface, volume and inverse-length ratio with converted units, positive geometric inverses and explicit model limits.
- Spherical Surface Area and Size Relationships
Calculate spherical surface area and size relationships with converted units, positive geometric inverses and explicit model limits.
- Square Pyramid Base, Single Face and Closed Surface
Square Pyramid Base, Single Face and Closed Surface. Use unit controls and documented positive geometric roots to compare base, lateral and total measures.
- Square Pyramid Capacity with Optional Surface Inputs
Square Pyramid Capacity with Optional Surface Inputs. Use unit controls and documented positive geometric roots to compare base, lateral and total measures.
- Square Pyramid Height from Seventeen Measurement Pairs
Square Pyramid Height from Seventeen Measurement Pairs. Use unit controls and documented positive geometric roots to compare base, lateral and total measures.
- Square Pyramid Surface, Slants and Positive Inverse Roots
Square Pyramid Surface, Slants and Positive Inverse Roots. Use unit controls and documented positive geometric roots to compare base, lateral and total measures.
- Trapezoidal Prism Side-Wall and Closed Surface Areas
Trapezoidal Prism Side-Wall and Closed Surface Areas. Use unit controls and documented positive geometric roots to compare base, lateral and total measures.
- Trapezoidal Prism Volume from Cross Section and Depth
Trapezoidal Prism Volume from Cross Section and Depth. Convert compatible units, recover unknown dimensions and distinguish curved surfaces, bases and total measures.
- Direct Variation: Constant and Values
Find the constant of direct variation or a missing x or y in y=kx, with a sampled straight-line chart.
- Logistic Sigmoid and Its Inverse
Calculate the logistic sigmoid of a real input or recover the input from a probability strictly between zero and one, with a correctly sampled sigmoid chart.
- Area of Solid and Built-Up Cross-Sections
Calculate ten common cross-section areas by combining rectangles, circular regions or triangular dimensions.
- Binomial Squares and Both Real Roots
Expand sum or difference squares and inspect both solutions of a squared linear expression.
- Check Whether Three Sides Form a Triangle
Classify positive side lengths using all three strict triangle inequalities.
- Decimal Amount Rounded to Two Places
Round a decimal amount to a displayed cent, retaining the original numerical value internally.
- Equal-Weight and Sample-Weighted Percentages
Average two through ten percentages equally or weight them by their underlying sample sizes.
- Hyperbolic Tangent and Its Six-Function Family
Calculate hyperbolic functions and principal inverse values at a nonzero real argument.
- Isosceles Trapezoid Area, Diagonal and Perimeter
Calculate measures of a trapezoid with equal legs from its parallel bases and perpendicular height.
- Isosceles Triangle Sides, Altitudes and Angles
Relate equal legs, base, apex angle, height, area and perimeter of an isosceles triangle.
- Recognize Signed Perfect-Square Quadratics
Check a quadratic discriminant and obtain coefficient magnitudes for a signed square representation.
- Right Trapezoid Area and Sloping Side
Solve a trapezoid with one perpendicular leg and one inclined leg.
- Sides and Angles of Similar Triangles
Solve two similar triangles from SSS or included-angle SAS data and one corresponding second-triangle side.
- Signed Percentage Change and Reverse Values
Measure change relative to the absolute starting value and solve supported reverse-value branches.
- Six Circular Functions from an Angle
Explore angle ratios, reciprocal functions and special-angle radical forms.
- Special-Angle Ratios and Numerical Values
Calculate six trigonometric ratios with exact special-angle expressions and undefined-pole notes.
- Trapezoid Area and Boundary Length
Find trapezoid area, perimeter and leg-height angle relations.
- Trapezoid Area and Inclined Legs
Relate trapezoid bases, perpendicular height, side lengths and supplementary interior angles.
- Trapezoid Bases, Offsets, Angles and Measures
Relate bases, height, side offsets, legs, perimeter and area of a trapezoid.
- Trapezoid Perimeter with Missing-Leg Alternatives
Calculate perimeter and recover a missing trapezoid leg from bases, the other leg and a base angle.
- Triangular Prism Volume and Surface Measures
Calculate prism volume and surface area from six descriptions of its triangular cross-section.
- Weighted Vector Sums and Differences
Add or subtract two vectors in Cartesian 2D or 3D coordinates, with optional scalar multiples and 2D polar input.
- Angle Ratios and Right Triangle Relations
Explore six trigonometric ratios alongside editable right-triangle measurements.
- Binomial Products by Four Terms
Expand linear or positive-integer-power binomials and inspect the four products.
- Centered Rectangular Pyramid Measures
Relate the height, volume, face slants and surface areas of a right rectangular pyramid.
- Centroidal Second Moments of Plane Sections
Find area second moments about horizontal and vertical centroidal axes for six planar sections.
- Circle Angles, Chords, Secants and Tangents
Apply six circle relations, including central angles and a tangent through a coordinate point.
- Cone Frustum Volume and Surface Measures
Relate two circular radii, perpendicular height, slant and surface areas of a conical frustum.
- Diagonal Sum of a Square Matrix
Find the trace of a two, three or four row square matrix.
- Exponential Evaluation and Point Fitting
Evaluate a shifted exponential or fit a basic exponential to one or two observations.
- Logarithm Products, Quotients and Powers
Calculate logarithmic terms and their expansion for a positive real base.
- One Cycloid Arch Measures
Calculate the dimensions, arc length and area of one complete cycloid arch.
- Pyramid Volume from a Triangular Base
Compute volume from perpendicular pyramid height and several descriptions of its triangular base.
- Recover Triangle Vertices from Three Midpoints
Find the original triangle vertices from all three side midpoints.
- Regular Pyramid Slopes and Edge Angles
Relate regular polygon base side, centered perpendicular height, edge length and face slopes.
- Right Triangle by Trigonometric Data
Relate right-triangle sides, angles and area through three input modes.
- Right Triangle with Named Sides
Solve the sides and acute angles of a right triangle from sides, an angle or area.
- Triangle Angles and Side Classification
Calculate interior angles and identify right, acute or obtuse and equal-side categories.
- Triangle Angles from Side or Angle Data
Use SSS, included-angle SAS or two known angles to find triangle interior angles.
- Triangle Midpoints and Oriented Area
Find a parallel midsegment or vertex midpoints in a coordinate triangle.
- Triangle Perimeter from Vertex Coordinates
Measure the three Euclidean sides and their sum from planar coordinates.
- Trigonometric Ratios and Three Triangle Modes
Calculate angle ratios and right-triangle sides in side, angle and area modes.
- Absolute Value of a Real Number
Find a real number’s nonnegative distance from zero.
- Choose k from n: Binomial Count
Count unordered selections of k distinct objects from n, without replacement.
- Power Set by Subset Size
List every subset of up to ten distinct numeric elements, grouped by size. See each binomial group count and the total 2ⁿ subsets.
- Real Hyperbolic Functions & Principal Inverses
Evaluate sinh, cosh, tanh and their reciprocals, or recover a real argument from an admissible function value.
- Two-Binomial Product & Coefficient Working
Expand (a₁x + a₀)(b₁x + b₀) into quadratic, linear and constant coefficients, including the two cross-products.
- Central Angle from Arc Length and Radius
Yes. This model divides positive arc travel by radius and keeps the accumulated angle. It does not reduce the result to a minor arc or one revolution.
- Clock-Hand Directional Hour–Minute Angles
Calculate both directed angles between hour and minute hands for a twelve-hour analog clock.
- Decimal Angle ↔ Degrees, Minutes & Seconds
Convert signed decimal degrees and compound degrees-minutes-seconds, with optional radians and other angle units.
- DMS, Decimal Degrees & Angle Unit Table
Compare degrees-minutes-seconds, decimal degrees and a third angle unit in the same table.
- Inscribed Angle, Intercepted Arc and Central Angle
Yes. The intercepted arc lies opposite the inscribed vertex. The central sweep is twice the inscribed angle, and its radian value times radius gives arc length. Major arcs are allowed within the stated open bounds.
- Complementary Angle Partner and Check
Find an angle that adds to 90 degrees, or check whether two entered nonnegative angles sum to that value within 10^-60 degree numerical resolution.
- Supplementary Angle Partner and Check
Find an angle that adds to 180 degrees, or check whether two entered nonnegative angles sum to that value within 10^-60 degree numerical resolution.
- Integer Operations with Worked Results
Add, subtract, multiply, divide, exponentiate, take roots or logarithms of integer operands with a visible calculation and real-domain checks.
- Signed Subtraction & Missing-Value Calculator
Subtract integers or decimals, including negative numbers, or recover either missing input from the difference.
- Ceiling: Smallest Integer at or Above
Round a signed decimal upward to the least integer that is no smaller than the input, including negative numbers and tiny positive fractions.
- Coprime Pairs and Sets
Check whether two positive integers are relatively prime, or whether a set of up to ten positive integers is collectively or pairwise coprime.
- Decimal Rounding to the Nearest Hundredth
Round a decimal number to the nearest 0.01, including negative values, with the rounding rule and precision behavior explained.
- Euclidean Residues and Signed Remainder Conventions
Calculate the nonnegative residue and the retained alternative signed-remainder conventions for a nonzero divisor.
- Factor Lists and Common Divisors
List the positive factors of one or two integers, find their common factors, and show signed factor pairs for a single negative input.
- Floor: Round Down to an Integer
Find the greatest integer less than or equal to a number, including negative decimals.
- Imaginary Unit Integer Power Cycle
Imaginary Unit Integer Power Cycle. Find the symbolic value of i raised to a positive, zero or negative integer exponent.
- Integer Divisor Counts and Signed Lists
Find the positive divisors and divisor count of an integer, include negative divisors for a single negative input, or compare the common divisors of two integers.
- Integer Square Check and Root Factors
Integer Square Check and Root Factors. Check whether a number is the square of an integer and show its root-factor identity.
- Least Common Multiple with Worked Methods
Find the LCM of up to fifteen nonzero integer or exact decimal values. Compare bounded multiple lists, highest prime powers and every GCF step.
- Modulo Remainders and Operation Ordering
Calculate the nonnegative residue and the retained alternative signed-remainder conventions for a nonzero divisor.
- Multiply Two or More Numbers
Multiply two to ten positive, negative or zero factors. Use the two-factor mode to recover a missing factor from a compatible product.
- Nonnegative Cube and Variable-Degree Roots
Nonnegative Cube and Variable-Degree Roots. Evaluate a real power or principal root, with reverse inputs where a unique solution exists.
- Nonnegative Integer Factorial Product
Multiply the positive integers through n, including the empty-product value 0! = 1.
- Nonnegative Radical with Variable Degree
Nonnegative Radical with Variable Degree. Evaluate a real power or principal root, with reverse inputs where a unique solution exists.
- Positive Integer Decimal Digital Root
Find the single-digit result of repeatedly summing decimal digits for a positive integer with up to 60 digits.
- RMS of a Number List
Find the root mean square of up to thirty positive, negative or zero observations. Count only entered values and keep very small results visible.
- Scientific, Decimal and Engineering Forms
Round a number to selected significant figures and show matching scientific, e, expanded decimal and supported SI engineering forms.
- Signed Change Between Two Values
Find the increase or decrease in original units, or recover the starting or ending value from a known change.
- Signed Inputs and Nonnegative Modulo Remainders
Calculate the nonnegative residue and the retained alternative signed-remainder conventions for a nonzero divisor.
- Signed Proportion Cross Products and Worked Steps
This workflow excludes zero in all four positions. General zero-numerator ratios can be valid, but they can leave an inverse denominator undetermined; those cases are not offered here.
- Triangle Angle Weights & Relative Side Ratios
Convert three positive angle weights into triangle angles and obtain relative side lengths through the sine rule.
- Triangular Dot Count and Positive Sequence Position
Enter a positive whole sequence position to find the sum of the first n positive integers, with conditional dot illustrations for positions one through eight.
- Two-Number Sum & Missing Addend
Add two signed decimal numbers or find an unknown addend from the other number and the sum.
- Big Number Calculator
Perform exact arithmetic on integers larger than JavaScript's ordinary safe-number range.
- Binary Calculator
Perform exact arithmetic on binary integers and convert the result to decimal and hexadecimal.
- Hex Calculator
Perform exact arithmetic on hexadecimal integers and convert the result to decimal and binary.
- Scientific Notation Calculator
Convert decimal numbers to normalized scientific and engineering notation.
- Circle Arc Length with Sector Area and Chord Controls
Calculate circle arc length with sector area and chord controls with retained unit controls, positive geometric roots and explicit inverse-branch assumptions.
- Circle Boundary Length and Enclosed Area
Circumference measures boundary length and uses length units. Enclosed area measures the disk and uses squared length units. Both can determine the positive radius of the same circle.
- Circle Center from Standard, General or Parametric Form
Find a circle’s center from one of three equation forms, with explicit coefficient meanings.
- Circle Equations, Center, Radius & Geometry
Connect a circle’s center and radius with standard, general and parametric coefficients, area and circumference.
- Circle General ↔ Standard Form Coefficients
Convert the coefficients of a normalized circle equation to or from its center and squared radius.
- Circle Radius from Circumference or Its Pi Coefficient
In full-circumference mode enter 28*pi. In π-coefficient mode enter 28. The coefficient field already supplies the π factor; adding another pi would multiply it twice.
- Circle Radius, Diameter, Circumference and Area
Enter a positive radius, diameter, circumference or area. The other values describe the same circle. Area-to-radius solving uses the positive square root, and length and area use different unit dimensions.
- Circular Sector Area, Arc and Chord Relationships
Calculate circular sector area, arc and chord relationships with retained unit controls, positive geometric roots and explicit inverse-branch assumptions.
- Circular Sector Boundary with Two Radial Edges
Calculate circular sector boundary with two radial edges with retained unit controls, positive geometric roots and explicit inverse-branch assumptions.
- Half-Disk Area, Diameter and Complete Perimeter
Yes. The full half-disk boundary is πr+2r. The curved semicircle by itself is only πr.
- Quarter-Disk Arc Length and Full Boundary
No. The curved arc is πr/2. The full boundary adds two radii, so P = πr/2 + 2r.
- Quarter-Disk Area and Remaining Square Corner
Its endpoints are one radius apart horizontally and vertically. The Pythagorean theorem gives √(r²+r²)=r√2 for an exact 90-degree quarter disk.
- Quarter-Disk Chord, Arc, Boundary and Square Remainder
It is the area of the radius-by-radius square outside the quarter disk, r²−πr²/4. It is not the area bounded by the chord and arc.
- Complex Magnitude & Phase to a + bi
Convert a complex number’s nonnegative magnitude and phase to its real and imaginary components.
- Complex Number Modulus & Principal Argument
Find the modulus and principal argument of a complex number from its real and imaginary components.
- Complex Number Trigonometric Amplitude & Phase
Obtain the radius and phase used in z = r(cos φ + i sin φ), with degree, radian and π-radian displays.
- Complex Conjugate & Magnitude from Real Components
Find the conjugate of a complex number by reversing its imaginary component, and calculate its nonnegative magnitude.
- Complex Magnitude & Phase to Real and Imaginary Parts
Turn a complex number’s nonnegative magnitude and phase into its real and imaginary components, with degree and radian inputs.
- Cartesian and Cylindrical Coordinate Pair
Convert rectangular and cylindrical coordinates in both panels, preserving quadrant-aware azimuth and signed heights.
- Distance Calculator
Calculate straight-line distance, displacement, midpoint, and coordinate differences between two points.
- Manhattan Distance and Coordinate Calculator
Calculate the sum of absolute coordinate differences in one, two, three or four dimensions, with a documented coordinate inverse branch.
- Segment Length and Collinearity Calculator
Add or subtract segment lengths and identify which point lies between the other two from exact distances.
- Slope Calculator
Find slope, distance, midpoint, line equation, and angle from two Cartesian points.
- 3D Cross Product and Vector Components
Compute a three-dimensional cross product from signed Cartesian components, with zero-vector handling, conditional vector summaries and a worked example.
- Cartesian & Polar Coordinates in Both Directions
Convert x/y coordinates to radius and angle, or radius and angle to x/y, with quadrant-aware angles and selectable angle units.
- Cartesian Distance Between Two Spatial Points
No. This workflow retains the six coordinate inputs and a read-only distance result. A distance equation can have reflected coordinate solutions, which this tool does not select.
- Cartesian Point Distance and Positive-Branch Coordinates
The solver adds the positive square root to the other point’s matching coordinate. A reflected point can have the same distance. The requested distance must be at least either known axis separation.
- Distance Between Two Cartesian Points
Calculate straight-line distance between two points on a plane, with a documented single-branch inverse for missing coordinates.
- Euclidean Vector Magnitude: 2D to 5D
Find the Euclidean length of a vector with two, three, four or five real components.
- Perpendicular Distance from a Point to a Plane
Find shortest distance to a plane given its equation or a normal vector and a point on the plane.
- Perpendicular Line Through a Point & Intersection
Find the finite-slope perpendicular through a supplied point and its intersection with the original line.
- Planar Segment Midpoint and Missing Endpoint Coordinate
Yes. Each coordinate is the arithmetic mean of the two endpoint coordinates on that axis. A negative position is valid; all axes must use a common coordinate scale.
- Polar & Cartesian Coordinates: Choose a Direction
Switch between radius-and-angle inputs and signed x/y inputs while keeping angle units and quadrant conventions explicit.
- Polar Radius & Angle to Cartesian Coordinates
Resolve a nonnegative radius and selected angle into Cartesian x and y coordinates.
- Rise, Run, Percent Grade & Slope Angle
Convert signed rise and positive horizontal run to slope percentage and angle.
- Segment Endpoint from Midpoint and Known Endpoint
Yes. In that case both endpoints coincide and the segment has zero length. Otherwise subtract the known endpoint from twice the midpoint, independently on each Cartesian axis.
- Triangle Area and Perimeter from Cartesian Vertices
No. The absolute determinant removes the orientation sign. Perimeter adds the three point distances. Collinear vertices return zero area, and repeated vertices are allowed as degenerate cases.
- Triangle Vertex Centroid and Missing Coordinate
Yes. Each axis averages three vertex coordinates. A missing coordinate equals three times the centroid coordinate minus the other two coordinates on that axis.
- XY Point to Radius & Signed Polar Angle
Convert a point’s signed Cartesian coordinates to its distance from the origin and quadrant-aware direction.
- XYZ & Spherical Coordinates: Radius, Polar Angle & Azimuth
Convert between Cartesian xyz and spherical coordinates using a polar angle from +z and an azimuth around the xy-plane.
- Antilog & Logarithm with a Chosen Base
Convert a logarithm value back to its number with a positive base, or recover the logarithm from the number.
- e to a Power & Natural Exponent
Calculate e raised to a real exponent and recover the exponent from a positive result, with a separate rounded display.
- Natural Logarithm & Exponential Inverse
Calculate the real natural logarithm of a positive number or recover the number from its logarithm.
- Negative Logarithm with a Chosen Base
Calculate minus the logarithm of a positive number using a positive base other than one.
- Powers of 10 & Reverse Logarithms
Find 10 raised to a real exponent, or recover the exponent from a positive result using a base-10 logarithm.
- Powers of 2 & Reverse Logarithms
Find 2 raised to a real exponent, or recover the exponent from a positive result using a base-2 logarithm.
- Base, Exponent and Power with Inverse Inputs
Base, Exponent and Power with Inverse Inputs. Evaluate a real power or principal root, with reverse inputs where a unique solution exists.
- Binary Logarithm & Power of Two
Find log₂(x) for a positive number, or recover x from its base-two logarithm.
- Constant Annual Exponential Growth & Decay
Project a positive quantity using a constant annual percentage rate, or solve for time, rate or starting value under the same model.
- Exponential, Logarithmic and Prime-Power Forms
Convert between real logarithmic and exponential expressions or express a positive integer as prime powers, with bounded local decimal calculations.
- Negative Powers and Reciprocal Evaluation
Negative Powers and Reciprocal Evaluation. Evaluate a real power or principal root, with reverse inputs where a unique solution exists.
- Raise a Base to a Power and Reverse Inputs
Raise a Base to a Power and Reverse Inputs. Evaluate a real power or principal root, with reverse inputs where a unique solution exists.
- Rational Powers in Real Arithmetic
Rational Powers in Real Arithmetic. Evaluate a real power or principal root, with reverse inputs where a unique solution exists.
- Real Logarithm with Any Valid Base
Calculate a real logarithm, recover its positive argument, or solve for a valid logarithm base.
- Basic Calculator
Evaluate arithmetic with parentheses, powers, percentages, and standard operator precedence.
- Exponent Calculator
Raise any real base to an integer or fractional exponent and show reciprocal forms for negative powers.
- Log Calculator
Calculate logarithms with any positive base, including common and natural logarithms.
- Quadratic Formula Calculator
Solve ax² + bx + c = 0 and report real or complex roots, the discriminant, and vertex.
- Root Calculator
Calculate square, cube, or nth roots, including real odd roots of negative numbers.
- Scientific Calculator
Evaluate scientific expressions with powers, roots, trigonometry, logarithms, constants, and factorials.
- Fraction Calculator
Add, subtract, multiply, or divide two fractions and reduce the answer to lowest terms.
- Percent Error Calculator
Compare an observed value with an accepted value and calculate absolute and signed percent error.
- Percentage Calculator
Solve percent-of, percent-ratio, and percentage-change questions with the formula shown.
- Ratio Calculator
Simplify a ratio, convert it to fractions and percentages, and scale it to a chosen total.
- Area Calculator
Calculate area and perimeter for rectangles, circles, triangles, trapezoids, and ellipses.
- Circle Calculator
Find diameter, circumference, area, and equations from a circle radius.
- Pythagorean Theorem Calculator
Find the hypotenuse and other properties of a right triangle from its two legs.
- Right Triangle Calculator
Solve all sides, acute angles, area, and perimeter from two right-triangle legs.
- Surface Area Calculator
Calculate total and lateral surface area for common solid shapes.
- Triangle Calculator
Solve a triangle from three side lengths, including area, perimeter, angles, and classification.
- Volume Calculator
Find the volume and surface area of common three-dimensional shapes.
- Angles Formed by Rectangle Diagonals
The rectangle corner angles are 90°. Its diagonals bisect one another; adjacent intersection angles add to 180°. Enter the selected labeled angle in degrees.
- Arctangent Principal Angle
Arctangent converts a real tangent value to its principal angle strictly between −90° and 90°. A tangent ratio does not identify the angle’s quadrant without other information.
- Circular Segment Area, Chord and Height
A circular segment is bounded by a chord and its arc. The central angle in radians gives sector area minus the triangle area; minor and major segments use different angle branches.
- Compare Right Triangle Scale Factors
Similar right triangles have equal ratios of corresponding sides. Match each leg to its counterpart; swapping legs changes those ratios.
- Convert a Circle Equation to General Form
Expand the squared offsets of a standard circle equation. C represents radius squared, while h and k are the center coordinates.
- Ellipse Center from Paired Points
The center is the midpoint of opposite vertices, opposite co-vertices or the two foci. For the standard ellipse equation, it is the pair of horizontal and vertical offsets.
- Hyperbolic Sine and Related Functions
Hyperbolic sine and cosine use exponential growth rather than periodic angles. The reciprocal functions csch and coth are undefined at zero; inverse branches use real principal values.
- Intersecting Circles and Crescent Areas
These formulas apply to two circles whose boundaries cross twice. Each crescent equals its disk area minus their common overlap; concentric and separate disks need another geometric case.
- Isosceles Triangle Heights, Radii and Area
An isosceles triangle has equal legs. Its altitude to the base splits the base in half and forms two right triangles; the two base angles are equal.
- Logarithm Change of Base
A logarithm base must be positive and different from one, and its argument must be positive. The change-of-base quotient gives the same value using any valid auxiliary base.
- Rectangular Pyramid Surface Area and Volume
A right rectangular pyramid has its apex directly above the center of its rectangular base. Each pair of opposite faces has the same slant height; vertical height and slant height are different measures.
- Right Triangle Sides and Acute Angles
Choose two sides, one side and an acute angle, or area and a side. The legs are perpendicular and the two acute angles add to 90°.
- Scale or Compare Right Triangles
A positive scale factor multiplies all three corresponding sides. The angles stay equal, while the area multiplies by the square of the scale factor.
- Scalene Triangle Sides, Heights and Area
Heron’s formula gives area from three positive sides satisfying every strict triangle inequality. A scalene triangle has three unequal sides; the right-triangle mode uses perpendicular legs.
- Six Trigonometric Functions of an Angle
Use degree or radian units consistently. Reciprocal ratios are undefined when the corresponding sine or cosine is zero; principal inverse branches represent only one periodic solution.
- Special Right Triangle Ratios and Area
Choose a 45–45–90, 30–60–90, fixed-leg-ratio or 3–4–5 triangle. Scale its sides together; perimeter scales linearly and area scales quadratically.
- Triangle Angles from Sides or Included Angles
Use the law of cosines with three sides or two sides and their included angle. Interior angles must be positive and sum to 180°; each side must be shorter than the other two combined.
- Triangle Side and Angle Relationships
Match each angle to the side opposite it. The law of cosines calculates the missing side from two known sides and their included angle; the angle-sum mode finds the third interior angle.
- Trigonometric Ratios from Degrees
A full rotation is 360 degrees. Sine and cosine are defined for every real angle; tangent and reciprocal ratios have singularities where their denominators vanish. Principal inverse branches do not recover every periodic angle.
- Trigonometric Values and Right Triangle Sides
Evaluate the six trigonometric ratios for a signed angle, or calculate right-triangle measurements. Reciprocal ratios are undefined where their denominator is zero; inverse angles use principal branches.
- Matrix Entrywise Product up to 3 × 3
Multiply corresponding entries of two equally sized matrices, from 1 × 1 through 3 × 3, with signed and zero entries and retained inverse relations.
- Matrix Scalar Multiplication, 1–3 Rows & Columns
Multiply every entry of a matrix by one real scalar, with selectable dimensions through 3 × 3 and reversible nonzero-factor calculations.
- Circle Chord, Sagitta and Minor Segment
Relate a circle’s minor chord, central angle, center distance and sagitta, including arc and segment measures.
- Circle Equation from Diameter Endpoints
Find a circle center, radius and equation coefficients from the two ends of its diameter.
- Circle Standard, General and Parametric Equations
Convert a circle center and squared radius between standard, general and parametric coefficient forms.
- Coordinate Gradient, Rise, Run and Distance
Calculate a line’s signed rise, run, slope, principal inclination and point-to-point distance.
- Dry-Matter Conservation Through Water Loss
Calculate total mass after water content changes while conserving the dry matter in a mass-balance puzzle.
- Ellipse Center, Vertices, Foci and Measures
Calculate axis-aligned ellipse vertices and foci from positive horizontal and vertical semiaxes and a center.
- Ellipse Semiaxes, Area and Approximate Perimeter
Estimate ellipse perimeter from two semiaxes and calculate its exact area and eccentricity.
- Four-Side Perimeter and Missing Side
Add four side lengths for perimeter or recover a positive missing side from the other three and perimeter.
- Inscribed and Equal-Area Circle–Square Measures
Compare the largest inscribed square or circle and separate shapes having equal area.
- Inverse Tangent and Principal Degree Angle
Find the unique inverse-tangent angle between −90 and 90 degrees or recover the corresponding ratio.
- Kite Area and Paired-Side Perimeter
Calculate a kite’s area from perpendicular diagonals or adjacent unequal sides and their included angle.
- Parallelogram Perimeter from Three Data Sets
Find a parallelogram’s perimeter from adjacent sides, a side with diagonals, or base, height and angle.
- Principal Arctangent with Angle Units
Convert a tangent ratio to its principal arctangent angle, with degrees, radians and other angle units.
- Principal Tangent Angle and Ratio
Convert a principal angle between −90 and 90 degrees to its tangent, or recover its principal angle from the tangent.
- Right-Angle Slant and Hypotenuse Measures
Find a cone generator, right-triangle hypotenuse or right-angle cross-section diagonal from perpendicular lengths.
- Scalene Triangle Area from Measurements
Use a perpendicular height, three sides or selected angles to calculate a nondegenerate triangle area.
- Solid and Hollow Cylinder Volume
Calculate solid or hollow cylinder volume, with radius, diameter, height and independent unit controls.
- Trapezoid Height from Leg–Angle or Area
Calculate perpendicular trapezoid height from a sloping leg and its angle, or from area and the parallel bases.
- Triangle Area by Height, Sides or Angles
Calculate triangle area using perpendicular height, three sides, an included angle or two angles around a known side.
- Triangle Side and Angles by the Cosine Law
Find a triangle’s third side from two sides and their included angle, or determine all angles from three sides.
- Bilinear Interpolation on a Rectangular Grid
Bilinear interpolation blends four corner values on a rectangle. Coordinate intervals must be nonzero; a midpoint averages the four corners.
- Combine Logarithms into One Argument
Addition of logarithms multiplies their positive arguments; subtraction divides them. Real bases must be positive and different from one.
- Cosine and Its Principal Angle
Cosine is the horizontal coordinate on the unit circle. The inverse returns a principal angle from 0° through 180°; other angles can share its cosine.
- Ellipse Perimeter with Ramanujan Approximation
The inputs are positive ellipse semiaxes, not full axis lengths. Ramanujan’s approximation gives the perimeter; equal semiaxes reduce exactly to a circle.
- Isosceles Trapezoid Area and Dimensions
An isosceles trapezoid has equal legs. Half the difference between its parallel bases forms the horizontal leg of a right triangle with the height.
- Isosceles Triangle Base from Equal Leg and Height
The altitude to the base bisects an isosceles triangle into two congruent right triangles. The equal leg must exceed the perpendicular height for a positive base.
- Linear Interpolation through Two Points
Two points with distinct x coordinates define a line. Interpolation uses its value between the points; outside that interval the same calculation is extrapolation.
- Parallelogram Area from Height, Sides or Diagonals
Perpendicular height determines parallelogram area with the base. Other modes use two sides and their included angle, or two diagonals and their included angle.
- Percent Parts, Totals and Adjustments
Percent means per hundred. A 25% share of 80 is 20; the percentage adjustment section applies an increase or decrease to its original value.
- Quadrilateral Perimeter from Sides or Coordinates
Perimeter is the sum of four edge lengths. The coordinate mode follows consecutive vertices around the boundary and adds their Euclidean distances.
- Relative Change with Signed Baseline
Relative change divides the signed difference by the magnitude of the nonzero baseline. An increase from 80 to 100 is 0.25 or 25%.
- Right Triangle Area from Legs or an Angle
A right triangle has perpendicular legs a and b, a hypotenuse c and complementary acute angles. Its area is half the product of the legs.
- Ring Torus Radii and Volume
A ring torus is formed by revolving a circular tube about an external axis. Inner and outer radii are measured from that axis; require 0 ≤ inner radius less than outer radius.
- Sine of an Angle and Principal Inverse
Sine is the signed vertical coordinate on the unit circle. The inverse returns the principal angle between −90° and 90°; it does not recover every periodic solution.
- Slope, Grade and Distance between Points
Rise over run is the signed slope between two coordinate points. Vertical lines have zero run and no finite slope; distance remains positive.
- Tangent Length from an External Point
A radius to a point of tangency is perpendicular to the tangent. The external point’s center distance d must be strictly greater than the positive radius r.
- Trapezoid Supplementary Angle Pairs
The bases of a trapezoid are parallel, so the two interior angles on each leg sum to 180°. The four interior angles sum to 360°.
- Triangle Circumcenter from Coordinates
Three noncollinear vertices determine a unique circumcircle. A right triangle’s circumcenter is the midpoint of its hypotenuse.
- Triangle from Two Sides and Included Angle
Two positive sides and an included angle strictly between 0° and 180° determine one triangle. The cosine rule determines its third side.
- Triangle Rise and Run or Signed Line Slope
A triangle uses positive rise divided by run. The line selector distinguishes upward from downward direction, assigning the sign while keeping lengths positive.
- Triangular Prism Volume from Its Cross Section
A prism of constant triangular cross section has volume equal to its face area times perpendicular prism length. Other modes calculate that face area from triangle dimensions.
- Angle Between Two Nonzero Vectors
Find the principal angle for vectors entered as components or starting and ending coordinates in two or three dimensions.
- Axis-Aligned Ellipse Foci
Locate foci and the horizontal and vertical semiaxis endpoints for a translated ellipse.
- Circle Coefficients and Equivalent Forms
Complete the square to connect general, center-radius and parametric circle forms.
- Integer Euclidean and Signed Remainders
Compare the nonnegative Euclidean residue with captured signed remainder alternatives for positive or negative divisors.
- Paired Triangle Sides by the Sine Rule
Solve each captured side-angle pair and inspect a valid supplementary-angle alternative in the SSA case.
- Parallelepiped Volume and Surface Area
Compute geometry from three edge vectors, four vertices or edge lengths with included angles.
- Perimeter of Plane Shapes
Find boundary length for circles, sectors, triangles, quadrilaterals, annuli and regular polygons with all captured entry branches.
- Rare-Event Expected Counts and Exposure
Explore expected counts and exposure duration under an entered rare-event rate.
- Signed Integer Division and Remainders
Inspect truncating and alternate integer quotient/remainder identities for signed inputs.
- Transpose a Matrix up to Four by Four
Swap rows and columns for all captured matrix dimensions from one through four.
- Triangle Heights in Four Forms
Relate heights, areas, side lengths and angles in general, equilateral, isosceles and right triangles.
- Triangle Orthocenter from Coordinates
Intersect two altitude lines to find the orthocenter of a nondegenerate coordinate triangle, including right triangles.
- Common Factor Calculator
List all positive factors shared by two or more whole numbers.
- Factor Calculator
List every positive factor and factor pair for a whole number.
- Greatest Common Factor Calculator
Find the greatest common factor of two or more whole numbers.
- Least Common Multiple Calculator
Find the least common multiple of two or more whole numbers.
- Prime Factorization Calculator
Break a whole number into prime factors and show exponential notation.
- Long Division Calculator
Divide whole numbers and show quotient, remainder, decimal result, and the division identity.
- Number Sequence Calculator
Analyze a sequence for arithmetic or geometric patterns and project its next five terms.
- Random Number Range Generator
Generate one or more random integers or decimals within an inclusive range.
- Rounding Calculator
Round a number to decimal places or significant figures and compare floor, ceiling, and truncation.
- Signed Percent Error and Inverse
Calculate signed percent error for positive measurements, or solve for the observed or true value with a retained step-by-step explanation.
- Signed Percent Increase and Decrease with Summary
Use either increase or decrease mode with a consistent signed absolute-magnitude change model and rounded explanations.
- Signed Percentage Decrease and Value Inverses
Compare nonzero signed starting values and final values with an absolute-magnitude percentage change.
- Decimal ↔ Percentage Converter
Convert a decimal proportion into percent, or turn a percentage number back into its decimal form.
- Duration as a Percentage of Total Time
Compare a duration with a positive reference duration using separate time units.
- Percentage of a Percentage & Amount
Combine two successive percentage proportions and calculate the amount remaining after each proportion.
- Percentage Points, Relative Change & Common-Base Values
Compare an absolute percentage-point change with relative percent change and corresponding values on a common base.
- Progress as a Percentage of Goal
Compare a nonnegative amount of progress with a positive target, including results above 100%.
- Cylinder Rim Circumference, Radius & Diameter
Convert between the radius, diameter and circumference of a circular cylinder rim using consistent length units.
- Plane Shape Areas by Dimensions
Calculate areas for seventeen plane-shape families, retaining triangle, parallelogram, rhombus and kite measurement methods.
- Circle Boundary Length from Radius or Diameter
Calculate circle boundary length from radius or diameter with bidirectional inputs, compatible units and clear geometric assumptions.
- Circle Diameter and Radius Conversion
Calculate circle diameter and radius conversion with bidirectional inputs, compatible units and clear geometric assumptions.
- Circle Diameter Recovered from Area
Calculate circle diameter recovered from area with bidirectional inputs, compatible units and clear geometric assumptions.
- Circle Measurements with a Zero-Radius Boundary
Calculate circle measurements with a zero-radius boundary with bidirectional inputs, compatible units and clear geometric assumptions.
- Circle Radius Recovered from Boundary Length
Calculate circle radius recovered from boundary length with bidirectional inputs, compatible units and clear geometric assumptions.
- Circle Radius, Diameter, Boundary and Area
Calculate circle radius, diameter, boundary and area with bidirectional inputs, compatible units and clear geometric assumptions.
- Circular Area with Square-Foot Unit Controls
Calculate circular area with square-foot unit controls with bidirectional inputs, compatible units and clear geometric assumptions.
- Circular Area with Square-Inch Unit Controls
Calculate circular area with square-inch unit controls with bidirectional inputs, compatible units and clear geometric assumptions.
- Circular Perimeter from Enclosed Area
Calculate circular perimeter from enclosed area with bidirectional inputs, compatible units and clear geometric assumptions.
- Circumference with Radius and Diameter Controls
Calculate circumference with radius and diameter controls with bidirectional inputs, compatible units and clear geometric assumptions.
- Rectangle Area, Boundary Length and Diagonal
Calculate rectangle area, boundary length and diagonal with bidirectional inputs, compatible units and clear geometric assumptions.
- Rectangle Perimeter from Area and a Known Side
Calculate rectangle perimeter from area and a known side with bidirectional inputs, compatible units and clear geometric assumptions.
- Rectangle Side Pair from Area and Perimeter: Larger-Side Branch
Calculate rectangle side pair from area and perimeter: larger-side branch with bidirectional inputs, compatible units and clear geometric assumptions.
- Rectangle Side Recovered from Diagonal and Width
Calculate rectangle side recovered from diagonal and width with bidirectional inputs, compatible units and clear geometric assumptions.
- Rectangle Sides from Area and Perimeter: Smaller-Side Branch
Calculate rectangle sides from area and perimeter: smaller-side branch with bidirectional inputs, compatible units and clear geometric assumptions.
- Square Area and Positive Side Length
Calculate square area and positive side length with bidirectional inputs, compatible units and clear geometric assumptions.
- Square Boundary Length and Diagonal
Calculate square boundary length and diagonal with bidirectional inputs, compatible units and clear geometric assumptions.
- Square Diagonal and Positive Side Length
Calculate square diagonal and positive side length with bidirectional inputs, compatible units and clear geometric assumptions.
- Square Side, Area, Perimeter and Diagonal
Calculate square side, area, perimeter and diagonal with bidirectional inputs, compatible units and clear geometric assumptions.
- Fifth Root and Integer-Order Real Roots
Find signed real roots, change the integer order, and distinguish negative odd roots from even-order inputs without a real result.
- Perfect Cube Integer Check
Check whether a signed number is the cube of an integer, with the exact multiplication shown for valid cubes.
- Real Nth Root with Domain Checks
Find the principal real nth root with an integer degree, including signed odd roots and explicit negative-even exclusions.
- Inverse Variation Values and Graph
Solve y=k/x for a variable or constant and inspect the retained positive-x sampled graph with accessible data values.
- Proportion Solver with Worked Steps
Solve an unknown ratio term with signed numbers and see the cross-multiplication steps for the value the calculator actually found.
- Fibonacci Recurrence with Generalized Seeds
Evaluate a Fibonacci-type recurrence at an integer index, with editable first two terms and negative-index support.
- Taylor–Lagrange Remainder Upper Bound
Estimate a Taylor-polynomial remainder bound from degree, center, evaluation point and a valid maximum next-derivative magnitude.
- 30–60–90 Triangle from a Known Measurement
Calculate 30–60–90 triangle from a known measurement with retained unit controls, positive geometric roots and explicit inverse-branch assumptions.
- 45–45–90 Triangle Equal Legs and Size
Calculate 45–45–90 triangle equal legs and size with retained unit controls, positive geometric roots and explicit inverse-branch assumptions.
- Equal-Leg Right Triangle Hypotenuse and Altitude
Calculate equal-leg right triangle hypotenuse and altitude with retained unit controls, positive geometric roots and explicit inverse-branch assumptions.
- Equal-Leg Triangle Base and Apex Angles
No. Enter the full base b. Its half b/2 appears only inside the formulas because the altitude bisects the base.
- Equilateral Triangle Area and Perpendicular Height
Calculate equilateral triangle area and perpendicular height with retained unit controls, positive geometric roots and explicit inverse-branch assumptions.
- Equilateral Triangle Side, Altitude and Circle Radii
Calculate equilateral triangle side, altitude and circle radii with retained unit controls, positive geometric roots and explicit inverse-branch assumptions.
- Heron Triangle Area, Perimeter and Side Relationships
Calculate heron triangle area, perimeter and side relationships with converted units, positive geometric inverses and explicit model limits.
- Hypotenuse from an Equal Right-Triangle Leg
Calculate hypotenuse from an equal right-triangle leg with retained unit controls, positive geometric roots and explicit inverse-branch assumptions.
- Isosceles Triangle Altitudes to Base and Equal Leg
Calculate isosceles triangle altitudes to base and equal leg with retained unit controls, positive geometric roots and explicit inverse-branch assumptions.
- Isosceles Triangle Area from Equal Leg and Base
Calculate isosceles triangle area from equal leg and base with retained unit controls, positive geometric roots and explicit inverse-branch assumptions.
- Parallel Triangle Segment Ratios and Missing Length
No. DB is the remaining part from D to B, and EC is the remaining part from E to C. The full sides are AD+DB and AE+EC.
- Pythagorean Right-Triangle Sides, Area and Boundary
Calculate pythagorean right-triangle sides, area and boundary with retained unit controls, positive geometric roots and explicit inverse-branch assumptions.
- Right Triangle Missing Measurements with Optional Area and Perimeter
Enter two legs, a leg and the hypotenuse, or a leg and area. Retain editable unit controls and optional area/perimeter measures, with positive right-triangle bounds.
- Right-Triangle Angles from Legs, Hypotenuse or Area
Calculate right-triangle angles from legs, hypotenuse or area with retained unit controls, positive geometric roots and explicit inverse-branch assumptions.
- Right-Triangle Missing Side with Acute-Angle Controls
Calculate right-triangle missing side with acute-angle controls with retained unit controls, positive geometric roots and explicit inverse-branch assumptions.
- Right-Triangle Perimeter from Legs or Three Sides
Calculate right-triangle perimeter from legs or three sides with retained unit controls, positive geometric roots and explicit inverse-branch assumptions.
- Right-Triangle Side Ratios, Angles and Area
Calculate right-triangle side ratios, angles and area with retained unit controls, positive geometric roots and explicit inverse-branch assumptions.
- Triangle Angles, Heron Area and Boundary from Three Sides
No. This SSS workflow accepts three side lengths and keeps area, perimeter and all three angles as read-only outputs. Other triangle workflows provide different supported inverses.
- Triangle Area from Three Sides and Obtuse Inverse Branch
Calculate triangle area from three sides and obtuse inverse branch with converted units, positive geometric inverses and explicit model limits.
- Triangle Area from Two Sides and Included Angle
Generally no. An acute angle and its obtuse supplement have the same sine and triangle area. The backward angle control returns the principal acute or right angle; area cannot exceed ab/2.
- Triangle Base Recovered from Area and Altitude
Calculate triangle base recovered from area and altitude with retained unit controls, positive geometric roots and explicit inverse-branch assumptions.
- Triangle Circumcircle, Inradius & Area
Calculate a triangle’s circumscribed circle and related geometry from three valid side lengths.
- Triangle Exterior Angles and Supplementary Interiors
Enter two interiors, or an interior and a nonadjacent exterior. Adjacent interior/exterior angles are dependent supplements. Two exterior inputs populate the third exterior only in this retained solver.
- Triangle Interior and Exterior Angle Relationships
No. Each exterior is the nonreflex supplement of its adjacent interior. Interiors sum to 180 degrees and these exteriors sum to 360 degrees. Enter two interiors or an interior plus a nonadjacent exterior for all fields; two exteriors produce only the third exterior.
- Triangle Interior Angle Sum and Missing Angle
This tool uses planar Euclidean geometry. Curved-surface triangles can have a different interior angle sum.
- Triangle Interior Angles: Find the Third
Find a missing interior angle of a plane triangle in degrees or radians.
- Triangle Sides and Angles with Cosine-Law Root Selection
No. An angle, its opposite side and another side can describe two triangles. This workflow uses the captured plus-square-root side branch and rejects nonreal or nonpositive branches. It does not enumerate every alternative.
- Triangle Sides and Area from Included Side and End Angles
Side a joins the vertices carrying β and γ. It lies opposite the computed angle α. The side lengths follow the sine law, and the area uses the included-angle triangle formula.
- Triangle Sides and Area from Opposite Side and Two Angles
The height is perpendicular to side b, so area is b times that height divided by two. Side a lies opposite α; enter a, α and β. The remaining measures are read-only outputs.
- Oblique Triangle Area in Four Ways
Find triangle area with all four captured input methods, retaining branch-specific inverses and explaining obtuse-angle and height conventions.
- Obtuse Triangle Area Methods
Find triangle area with all four captured input methods, retaining branch-specific inverses and explaining obtuse-angle and height conventions.
- Right Triangle Sides, Area and Consistency Checks
Find a right triangle leg, hypotenuse or area, or compare entered sides and angles with right-triangle relationships.
- Triangle Perimeter from Sides or Angles
Find a triangle boundary length using three sides, two sides with their included angle, or a side and two adjacent angles.
- Hypotenuse, Right Triangle Sides and Area
Find a right triangle’s hypotenuse, legs, acute angles, area or perimeter from compatible known measurements.
- Oblique Triangle Sides, Angles and Area: Four Methods
Solve non-right triangles from three sides, two sides and an included angle, or two angles and a side.
- Triangle Side from Perimeter, Angles and Known Sides
Find a missing triangle side from its perimeter, a selected angle and two sides, or a side with two angles.
- Double-Angle Sine, Cosine and Tangent
Evaluate a doubled-angle trigonometric function or solve its principal inverse, with units, exact special-angle references and optional working.
- Inverse Cosine — Principal Angle
Find the principal inverse cosine angle from a value between −1 and 1, with degree and radian units.
- Inverse Sine — Principal Angle
Find the principal inverse sine angle from a value between −1 and 1, with degree and radian units.
- Sine Angle and Principal Inverse
Evaluate sine in any retained angle unit, or solve the principal inverse from a sine value, with special-angle identities and a reference wave.
- Tangent Side Ratio and Angle Branches
Find tangent, an opposite or adjacent value, or a selected principal angle with full angular units.
- Arccosine Principal Angle & Cosine Ratio
Find the principal angle for a cosine ratio, or solve the ratio from an angle between 0° and 180°, with nine angle units.
- Arcsine Principal Angle & Sine Ratio
Find the principal inverse sine angle from a ratio, with negative angles, reverse entry and degrees, radians, turns or arc units.
- Arctangent Value and Principal Angle Conversion
No. It selects one principal angle in the open interval from −π/2 to π/2. Tangent repeats periodically, but angles outside this branch are rejected in the backward control.
- Cosine of an Angle with Near-Zero Snapping
No. Its cosine is a read-only value displayed in the result note. Any real angle is accepted, including values outside triangle angles. Values with absolute cosine below 1e−15 are snapped to zero.
- Inverse Cosine with Principal-Angle References
Inverse Cosine with Principal-Angle References. Find the principal inverse angle or convert a entered angle to its sine/cosine ratio.
- Principal Arccosine Angle in Nine Units
Principal Arccosine Angle in Nine Units. Find the principal inverse angle or convert a entered angle to its sine/cosine ratio.
- Principal Arcsine Angle and Sine Ratio
Principal Arcsine Angle and Sine Ratio. Find the principal inverse angle or convert a entered angle to its sine/cosine ratio.
- Principal Inverse Tangent in Degrees and Radians
They are tangent poles and cannot correspond to a finite real input. Principal arctangent returns an angle strictly between these limits; degree, radian and other selectors represent that same branch.
- Six Principal Inverse Trigonometric Functions
Select arcsine, arccosine, arctangent, arccotangent, arcsecant or arccosecant and convert its principal angle among supported units.