A little clarity for your next decision
Chemistry calculators
Work with concentrations, molecular quantities, and chemical measurements.
73 calculators available
- Enzyme Specific Activity & Required Mass
Find enzyme preparation mass from its specific activity, a target activity per volume and final volume.
- Isoelectric Point from Two Bracketing pKa Values
Estimate pI from the two acid-dissociation pKa values surrounding a neutral species, or recover a missing pKa using the same two-step charge model.
- Linear Calibration Concentration
Recover an unknown concentration from a linear calibration slope and intercept.
- Michaelis–Menten Saturation Rate
Relate substrate level, Michaelis constant and a saturating maximum rate.
- Solute Amount, Target Concentration & Final Volume
Find final solution volume from a known solute amount and desired amount concentration.
- Actual Yield, Theoretical Yield & Recovery Percentage
Relate measured product mass, theoretical product mass and their percentage ratio.
- Arrhenius Rate, Temperature & Activation Energy
Solve the Arrhenius relation for activation energy, first-order rate constant, frequency factor or absolute temperature with reversible unit conversion.
- Concentration Equilibrium Quotient
Form a concentration quotient for a reaction with two reactants and two products.
- Gas Equilibrium Constants and Pressure Quotients
Convert numerical Kc to Kp on a chosen pressure convention or form a four-species pressure quotient.
- Limiting-Reactant Stoichiometric Product Yield
Calculate theoretical product amount and mass from a known limiting reactant and balanced reaction coefficients.
- Reaction Product Mass & Percent Yield
Calculate percent yield from actual and theoretical product masses, or solve either mass with selectable mass units.
- Gibbs Energy from Enthalpy, Entropy & Temperature
Relate Gibbs energy change, enthalpy change, entropy change and absolute temperature on a common process basis.
- Gibbs Phase Rule with Fixed Conditions
Calculate equilibrium degrees of freedom from independent components and phases, with zero, one or two fixed temperature/pressure constraints.
- Ideal Gas Volume at Conventional STP
Convert gas volume to 273.15 K and 760 Torr using an ideal-gas relation.
- Q10 Rate Change per Ten Degrees
Calculate the Q10 temperature coefficient from two positive rates at different temperatures, with reversible rate and temperature solving.
- Reaction and Ideal-Gas Entropy Relations
Combine reaction entropies, Gibbs energy and reversible isothermal ideal-gas volume or pressure changes.
- Solution Boiling Elevation, Molality & Particle Factor
Estimate ideal boiling-point elevation from solvent properties, molality and van’t Hoff factor, with corrected interval and reciprocal-mass units.
- Solution Freezing Point, Molality & Particle Factor
Estimate freezing-point depression for a dilute solution using solvent presets or a custom cryoscopic constant and particle factor.
- Temperature–Vapor Pressure & Raoult’s Law
Relate two equilibrium vapor pressures and temperatures with constant vaporization enthalpy, or calculate an ideal solution’s solvent partial pressure.
- Water Boiling Point from Standard Atmosphere Altitude
Estimate pressure and water boiling temperature from elevation using two empirical standard-atmosphere relations.
- Water Saturation Pressure Formula Comparison
Compare liquid-water and ice saturation-pressure fits across a bounded temperature range.
- Galvanic Cell Reduction-Potential Difference
Subtract anode reduction potential from cathode reduction potential for a positive galvanic-cell potential.
- Ionic Strength for up to Ten Species
Sum concentration-weighted squared charge numbers for up to ten dissolved ionic species.
- Nernst Reduction Potential from Activities
Calculate a half-cell reduction potential from activity ratio, temperature and electron count.
- Acid pKa from Ka or Buffer Measurements
Calculate pKa from a positive acid dissociation constant or estimate it separately from buffer pH and component concentrations.
- Atom and Ion Particle Count Explorer
Relate atomic number, mass number, ionic charge and proton, neutron and electron counts with periodic-table identification.
- Isotope-Weighted Mean Atomic Mass
Average two through ten isotope masses using entered percentage abundances.
- Mass Concentration & Molar Concentration
Convert positive mass-per-volume concentration to amount-per-volume concentration using the solute molar mass.
- Molecular-Orbital Electron Counts & Bond Order
Find molecular-orbital bond order from bonding and antibonding electron counts, including zero net bond order.
- Average Buffer Capacity for Base Addition
Calculate the positive average amount of added strong base per liter per unit rise in pH.
- Buffer pH, Acid–Base Ratio & pKa
Solve the Henderson–Hasselbalch relationship between weak-acid buffer pH, pKa and the conjugate-base-to-acid concentration ratio.
- Calcium & Magnesium to CaCO₃ Water Hardness
Estimate calcium-and-magnesium hardness as CaCO₃, classify the result, or recover one ion concentration from measured hardness and the other ion.
- Conserved-Solute Concentration & Volume
Solve the concentration-volume balance for a fixed amount of solute before and after a volume change.
- Debye–Hückel Limiting Activity Coefficient
Estimate a single-ion activity coefficient in a very dilute solution using an entered solvent-dependent constant.
- Dissolved Mass per Final Volume
Relate dissolved mass and final solution volume to mass concentration.
- Equivalent Mass, Concentration & Solution Volume
Relate reaction-specific equivalent mass to solute mass, final solution volume and equivalent concentration.
- Mass Percent & Density to Molar Concentration
Convert mass percentage to molarity or solve a related quantity using solution density and a preset or custom solute molar mass.
- Mass, Volume and Solution Percentages
Relate mass/volume concentration, mass fraction, volume fraction and compatible concentration-unit representations.
- Saponification Value from a Blank Titration
Use blank and sample titrant readings, titrant concentration and sample mass to estimate milligrams KOH per gram.
- Solution Concentration and Dilution Modes
Calculate mass/volume percent, mass fraction, molarity, dilution or a density-based concentration with separate mode controls.
- Stock, Diluent & Total-Volume Dilution Ratios
Compare total-to-stock and diluent-to-stock ratios for positive volumes under an additive-volume assumption.
- Two-Solution Alligation Mixture
Find the volumes and reduced mixing ratio for two compatible solutions with additive volumes and a shared volume-based concentration scale.
- Weak-Acid or Weak-Base Buffer pH
Relate buffer pH, conjugate-pair concentrations and acid/base equilibrium constants.
- COD from Blank and Sample Titrations
Calculate an uncorrected titrimetric chemical oxygen demand from blank/sample FAS volumes, normality and sample aliquot volume.
- Formula Hydrogen Deficiency & Unsaturation
Calculate the hydrogen-deficiency index from carbon, hydrogen, nitrogen and halogen atom counts.
- Organic Formula Degree of Unsaturation
Calculate double-bond equivalents from carbon, hydrogen, nitrogen and halogen counts under the standard neutral-molecule valence model.
- Cubic Crystal Plane Spacing & Miller Indices
Calculate interplanar spacing for a cubic lattice from its lattice constant and signed integer Miller indices, with material presets.
- Cubic Lattice Edge from Atomic Radius
Relate hard-sphere atomic radius to simple, body-centered or face-centered cubic cell edges.
- Nominal Tank Detention Time from Volume & Flow
Estimate nominal hydraulic detention time from operating liquid volume and flow, or derive volume from constant base area and liquid depth.
- Optical Absorbance, Concentration & Transmission
Relate decadic absorbance, percent transmittance, concentration, optical path and molar absorption coefficient.
- Tank Volume, Flow & Hydraulic Retention Time
Estimate nominal hydraulic retention time from working liquid volume and steady flow, with area-depth volume calculation.
- Exponential Half-Life and Lifetime
Relate first-order half-life, decay constant and mean lifetime to a remaining quantity.
- Graham’s Gas-Rate & Molar-Mass Comparison
Compare ideal gas effusion rates and molar masses using Graham’s inverse-square-root relationship.
- Langmuir Single Layer Surface Coverage
Solve equilibrium coverage, pressure or adsorption constant for a single-class monolayer adsorption model.
- Radionuclide Activity, Specific Activity & Half-Life
Calculate activity and specific activity from the mass, molar mass and half-life of a single radionuclide using the exact Avogadro constant.
- Solution Osmotic Pressure & Molar Concentration
Estimate osmotic pressure from concentration, temperature, particle factor and osmotic coefficient, or derive concentration from mass and solution volume.
- Air-to-Fuel Mass Ratio & Fuel Presets
Relate air mass, fuel mass and their ratio with fixed fuel presets or a custom air-to-fuel ratio.
- Avogadro Atoms, Moles & Sample Mass
Convert between atom count, amount in moles and sample mass using the exact Avogadro constant and your entered molar mass.
- Binary Mixture Mole Fraction & Molality
Find solute mole fraction and mole percent in a two-component mixture, with optional molality from solvent molar mass.
- Chromatography Bed, Flow & Residence Time
Calculate nominal bed residence time from linear flow velocity or cylindrical bed dimensions and volumetric flow.
- Dilute-Water pH, pOH & Hydrogen-Ion Estimate
Convert pH, pOH and approximate hydrogen-ion concentration in dilute water using pKw = 14 near 25°C.
- Ideal-Gas Sample Molar Mass
Estimate a gas sample’s molar mass from mass, absolute pressure, volume and temperature using the ideal-gas law.
- Mass-Fraction ppm to Molarity at 1 kg/L
Convert mass-based parts per million or billion to molarity at the fixed solution-density assumption of 1 kg/L.
- Moles and Entity Count
Convert an amount in moles to a count of specified atoms, molecules or ions using the exact SI Avogadro constant.
- Product Mass Share and Stoichiometric Atom Economy
Compare desired-product mass with total reagent mass or compute the stoichiometric molar-mass share.
- Reaction Equivalent Concentration from Mass & Volume
Calculate reaction-specific equivalents per volume from solute mass and a stated equivalents-per-mass factor.
- Sample Mass, Moles & Molecule Count
Convert sample mass, molar mass, amount of substance and molecule count with scientific notation and selectable mass and mole units.
- Solute Mass, Solution Volume & Molarity
Relate solute mass, molar mass and final solution volume to mass concentration and molarity.
- Solute Moles, Solvent Mass & Molality
Calculate molality from solute amount and solvent mass, with an optional solute-mass and molar-mass calculation.