Free · Energy and power converters ⚡

Power Units, Horsepower and Heat Rate

Convert one power value across SI prefixes, mechanical, metric and electrical horsepower, BTU (IT) per hour, thermochemical kilocalories, ergs per second and refrigeration tons.

  • Formula & worked example
  • Private in your browser
  • No signup
Go to tool

Calculator inputs

Loading calculator…

How to use this calculator

  1. Enter the known values in the units shown. Results update as you type.
  2. Where results are editable, change one to solve backwards. Lock a value to hold it fixed.
  3. Use the worked example to check the method. Reset restores the starting fields.

Private by default

Inputs and results stay in this browser tab. Bookify does not upload or store the values you enter.

Formula and method

1,000 watts equals 1 kW or 1,000,000 mW. It is about 1.34102209 mechanical horsepower, 3,412.14163313 BTU (IT)/h, or 0.28434514 refrigeration tons.

Each row equals the same power in watts. 1 mechanical hp = 550 ft·lbf/s; 1 metric hp = 75 kgf·m/s; 1 electrical hp = 746 W; 1 TR = 12,000 BTU (IT)/h

Worked example

Enter these known values and leave the other values blank.

SI power
1000 W
Small SI power
1000000 mW
Large SI power
1 kW
Mechanical and electrical horsepower
1.341 hp(l)
Metric horsepower
1.3596 hp(M)
Heat rate
3412 BTU (IT)/h
Thermal power
860.4 kcal (th)/h
Erg power
10000000000 erg/s
Refrigeration capacity
0.28435 TR

Assumptions and limitations

  • Enter one known power. Every row represents the same signed quantity in a selected unit; the rows are not additive or separate power requirements. Zero and negative signed power are allowed.
  • Mechanical horsepower uses exactly 550 international foot-pounds-force per second with standard gravity; metric horsepower is 75 kgf·m/s; electrical horsepower is defined here as 746 W. The air-horsepower choice retains the same conventional 550 ft·lbf/s scale; it does not account for airflow or compressor efficiency.
  • BTU choices use the International Table convention at 1055.05585262 J per BTU. Kilocalories use the thermochemical convention at 4184 J per kcal, with the selected hour or minute denominator. Mixing BTU/calorie conventions changes the result.
  • One ton of refrigeration is conventional cooling capacity of 12,000 BTU (IT) per hour. It is a power unit and does not mean a ton of material. This tool does not size equipment, determine electrical consumption or apply an efficiency factor.
  • The initial rows use mW, W, kW, mechanical hp, metric hp, BTU/h, kcal/h, erg/s and refrigeration tons. Unit selectors can change their representation while preserving the same power.

Common questions

Are mechanical, metric and electrical horsepower equal?

No. They use different definitions: 745.69987158227022 W, 735.49875 W and 746 W respectively. Select the convention that matches the rating being converted.

Does refrigeration capacity tell me electricity usage?

No. A refrigeration ton is cooling power. Electrical input depends on the system’s operating conditions and efficiency, which are outside this conversion.

Can I convert a negative signed power?

Yes. Sign is preserved across unit representations. The physical meaning of the sign depends on the direction convention of the system you are modeling.

References

Rounded captured kcal/hour, kcal/minute, refrigeration-ton and air-horsepower factors are replaced with consistent thermochemical calorie, IT BTU and conventional mechanical horsepower definitions. Mechanical horsepower uses exactly 550 foot-pounds-force per second instead of a rounded factor. The power unit uses the International Table BTU per hour consistently with the reviewed energy convention.

Explore energy and power converters ⚡ or browse all conversion calculators.