Free · Electronics and circuits calculators 💡

Resistor Voltage Drop and Divider

Calculate resistor voltage drop and divider with local equations, selectable units and supported inverse relationships.

  • Formula & worked example
  • Private in your browser
  • No signup
Go to tool

Calculator inputs

Loading calculator…

How to use this calculator

  1. Enter the known values in the units shown. Results update as you type.
  2. Where results are editable, change one to solve backwards. Lock a value to hold it fixed.
  3. Use the worked example to check the method. Reset restores the starting fields.

Private by default

Inputs and results stay in this browser tab. Bookify does not upload or store the values you enter.

Formula and method

Voltage = 2. Values use the worked example unit selections.

V = IR; Vout = Vin R2/(R1+R2); Rdrop = (Vs−Vl)/I; P = I²R

Worked example

Enter these known values and leave the other values blank.

Select what you want to calculate:
Voltage drop through a resistor
Resistance
100 Ω
Current
0.02 A
Voltage
2 V

Assumptions and limitations

  • Ideal DC resistors are assumed. The divider is unloaded. A dropping resistor needs positive current and a supply greater than the load voltage; select a practical power rating above computed dissipation.
  • Unit selectors convert known physical quantities. Leave a supported unknown blank; derived inverse branches are limited by the stated model and available captured equations.

Common questions

What does this calculation assume?

Ideal DC resistors are assumed. The divider is unloaded. A dropping resistor needs positive current and a supply greater than the load voltage; select a practical power rating above computed dissipation.

Can I solve for an input?

Where the captured model supplies an inverse, leave that quantity blank and enter the remaining known quantities. A positive square-root or principal trigonometric inverse may represent only one of multiple mathematical branches.

Which unit should I use for the worked example?

The example uses the initial metric unit selection beside each field. Change a unit using its selector to convert the same known quantity; switching a unit does not change the underlying physical value.

References

Original accessible explanations preserve the captured diagram geometry, quantities and conditional variants without external image loading. Restrict the physical model to non-singular dimensions and stated principal inverse branches; discrete gear/fringe counts are exact integers. The power unit uses the International Table BTU per hour consistently with the reviewed energy convention. Mechanical horsepower uses exactly 550 foot-pounds-force per second instead of a rounded factor.

Explore electronics and circuits calculators 💡 or browse all physics calculators.